Connecting the Computer Projector

By lexutor Oct11,2022

Connecting the Computer Projector

There is just one problem that you will face when you put together the ultimate computer slide show. You should transfer the slide show from the computer to the projector. Otherwise, you have to stand around the workstation in order to see the work. Unless you mind the co-workers invading the personal space and also generally putting the serious crimp in the solitaire playing time, learn the way to connect the computer projector by following these easy steps.

For the first step, you can choose the connection method. Most of computer ready projectors will accept the variety of input sources. You can make the connection based on what cables that you have at hand and also what the computer can support. The easiest connection that can make is from the USB monitor output on the computer to the USB or S-Video input on your projector. The common connection is through the VGA monitor output on the computer to the analog VGA input port on a projector.

For the second step, you can gather the cables that you need to make a connection. If you intend on controlling a projector from the computer, rather than from the remote of the projector, you will need in stringing the second cable from the computer’s serial out port to the control input port of the projector. Then, consult the user manual of the projector to see if this is important.

You have to power down everything that includes both of your laptop computer and also the projector as well. You will also need to turn off all peripherals hooked into the laptop. After you power all down, unplug the AC from everything, too.

For the next step, you should make the connections. The most mistakes that are made in hooking up the projector, or any piece of the electronic, is sticking the plug in the wrong port. You need to double check the connections and then make sure that the correct outputs will be linked to the correct inputs.

It is important for you to re-connect a power supply to the computer, the projector and also any peripheral stuff that you have hooked up to the computer. Then, turn on the juice.

For the last step, do not forget to set the input of your computer projector. Usually, it is the simple on-screen menu. After that, look for terms just like COMPUTER, PC or even SVGA. Then, test the connection. Assuming everything that looks great, you can get ready in knocking the presentation out of a park.

By lexutor

Related Post